# Communication between HAproxy 1.8 and backend in H2

**URL:** <https://discourse.haproxy.org/t/communication-between-haproxy-1-8-and-backend-in-h2/1933>\
**Category:** Help!\
**Created:** [December 26, 2017, 9:08pm UTC](https://discourse.haproxy.org/t/communication-between-haproxy-1-8-and-backend-in-h2/1933 "2017-12-26T21:08:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mmayen](https://avatars.discourse-cdn.com/v4/letter/m/9dc877/32.png) [@mmayen](https://discourse.haproxy.org/u/mmayen)\
**Post date:** [December 26, 2017, 9:08pm UTC](https://discourse.haproxy.org/t/communication-between-haproxy-1-8-and-backend-in-h2/1933/1 "2017-12-26T21:08:24Z")

</div>

Hello,

I would like to know how it is possible to communicate with backend in h2 mode.

My conf :

```
frontend https
        bind *:443 ssl crt /etc/haproxy/certs/ no-tlsv10 alpn h2,http1.1
        mode http
        use_backend my-site.org_HTTP2 if { ssl_fc_alpn -i h2 }

backend my-site.org_HTTP2
	mode http
        server nginx_http2 x.x.x.x:80 send-proxy

```

But when I “tcpdump” on my backend, I see the request in HTTP/1.1

Thanks for your help.

Best regards,

---

<div class="post-metadata">

**Author:** ![lukastribus](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@lukastribus](https://discourse.haproxy.org/u/lukastribus)\
**Post date:** [December 27, 2017, 8:20am UTC](https://discourse.haproxy.org/t/communication-between-haproxy-1-8-and-backend-in-h2/1933/2 "2017-12-27T08:20:04Z")

</div>

HTTP/2 is not supported on the backend yet.

---

<div class="post-metadata">

**Author:** ![mmayen](https://avatars.discourse-cdn.com/v4/letter/m/9dc877/32.png) [@mmayen](https://discourse.haproxy.org/u/mmayen)\
**Post date:** [December 27, 2017, 7:23pm UTC](https://discourse.haproxy.org/t/communication-between-haproxy-1-8-and-backend-in-h2/1933/3 "2017-12-27T19:23:22Z")

</div>

That is a very good explanation 😅
